Putting in place a good well-conceived and well-done plumbing system is important. However, maintenance and preventive measures taken to keep the system in good shape is even more important.
One of the most common problem in plumbing sytem is leaks. Leaks in your plumbing system are not just unsanitary but is a tremendous loss of a scarce resource. More often than not leaks are detected much later than they had started and after much damage had already been done.
Try this test out to determine whether there is a leak in your plumbing system. Before you go to bed in the night, close the Main valve at the primary inlet of your plumbing system. Note the water meter reading. In the dawn, before you start using water, note the reading. If the reading has changed then, there is a leak in the system.
To locate the leak, repeat the procedure by keeping the main valve open and all but one of your ancillary line valves closed. If the reading shows a change, then the leak is in that particular branch line. Inspect the faucets for visible leaks and path of the lines for subtle hints of invisible leaks behind the plastered walls. If you still can’t detect the leak. Contact us for expert care.
Reasons:
While visible are due to faulty faucets / fixtures, Invisible leaks can be due to cracks in your plumbing lines. The cracks happen due to (a) Ageing lines giving off or (b) Faulty winterization of you plumbing system.
Solution:
Replace the faulty fixtures / faucets.
If the leak is due to faulty line, replace the line. If your plumbing system is considerably old, you can think of replacing the lines in stages without waiting for the system to call for your attention and doing much damage to your cherished home.
Preventive Measures:
Make proper use and take proper care of your faucets and other movable water outlets. Install only good quality faucets that’ll stand the wear and tear. Don’t compromise on quality for price. Remember, a compromise on quality is a compromise on peace of mind.